Learn how a power plant in North Dakota decreased their quicklime consumption & operating costs by almost $1 million annually. Highlights: Quicklime consumption decreased by over 10% annually; Reduced slaking system maintenance costs by $120,000 annually; Increased Sulphur scrubbing efficiency; Reduced Carbon footprint by 5,300 tons CO2 annually Increased slaking system throughput from 63% to 100% of name-plate capacity. The installed cost of the upgrade was under $200,000 – payback was less than 3 months.

Complete a free self-guided system review that provides you a customized report outlining simple, cost-effective ways to improve the operation of your dry chemical handling system.The System Health Check uses our expertise & data to help you take a proactive approach to identifying potential safety, reliability and process challenges before they become a problem.

The three forms of chemical lime are Calcium Carbonate (CaCO3), Calcium Oxide (CaO), and Calcium Hydroxide (Ca(OH)2). These three are directly linked, and together form what is often referred to as the Calcium or Lime Triangle.

Choosing the right lime slaker for your application is no easy task. Here you will find information on each type of lime slaker and we’ll help you to understand the advantages and disadvantages between Detention slakers, Paste slakers, Horizontal Ball Mills, Vertical Ball Mills and Mixtank/ Batch slakers.

Our optimization specialists devised an experiment to show exactly how important slaking temperature is to lime reactivity and lime consumption. The results of which are displayed in this case study.

Learn more about the Patent Pending VERTIMILL® Retrofit Kit. VERTIMILL® slakers have been utilized as a premium lime slaker that eliminates the grit handling requirements and also produces a superior quality, more reactive, lime slurry. A typical VERTIMILL® slaker, as supplied from the factory, may allow short-circuiting of the fresh feed, resulting in large particle carry-over downstream. A small, but meaningful, percentage of the fresh feed will pass directly from the top of the slaking/grinding chamber directly into the Separating Chamber before effective slaking or grinding of the grit has occurred.

Choosing the right lime slaker for your application is no easy task. Here you will find information on each type of lime slaker and we’ll help you to understand the advantages and disadvantages of each.

This short PowerPoint tackles the many misconceptions about bolted tanks and leakage. Get the facts!

Fusing glass to the steel is unlike traditional coatings such as paints and epoxy that are superficial. Understand the difference.

Eliminating Large Particle Carryover – Improving Milk of Lime Reactivity STT's Patent Pending VERTIMILL® Retrofit has exceeded performance expectations. After 8 months of operations: Elimination of large particle carry-over.; 16% reduction in lime consumption per ton of SO2 removed; Higher scrubbing efficiency was achieved (less SO2 discharged to the environment); Maintenance intervals and tank cleanout frequencies have been improved due to reduced largeparticle carry-over. This is a ‘Patent Pending’ improvement is suitable for all sizes of Lime Slaking VERTIMILL® in lime slaking duty.